The SUR-K level detectors are designed for remote automated monitoring and signaling of changes in the level of controlled electrically conductive and non-electrically conductive liquids or bulk products both in stationary and shipboard conditions.
The alarm system meets the requirements of the Russian Maritime Register of Shipping for automation tools.
The principle of operation is based on the registration of changes in the wave resistance of the medium by a sensitive element.
Features and benefits
Type of execution | Structural design | Relative permittivity | The length of the submerged part of the sensor element, mm | Parameters of the controlled environment | Output signals | |||
Temperature | Operating overpressure, MPa | Granule size, mm, no more | Types of controlled environments | |||||
1 | Disk sensing element, monoblock version |
≥ 20 |
from 60 to 2000 |
-40…+85 °С |
up to 204 |
5 |
Sea water with the presence of mechanical particles; bilge water – sea water with the presence of impurity 1; fresh water; distillate; bidistillate; liquid aggressive media2;other liquid media with dielectric permittivity ɛ > 20; bulk media with dielectric permittivity ɛ > 20 |
Relay or analog 4-20 mA |
2 | Disk sensing element, separate version with a secondary converter |
≥ 20 |
-40…+150 °С |
up to 204 |
Sea water with the presence of mechanical particles; bilge water – sea water with the presence of impurities1; fresh water; distillate; bidistillate; liquid aggressive media2; other liquid media with dielectric permittivity ɛ > 20; bulk media with dielectric permittivity ɛ > 20 | |||
3 | Coaxial sensing element, monoblock design |
≥ 2,5 |
0…+50 °С |
up to 204 |
– |
Technical oils3; edible oils; oil; liquid petroleum products | ||
4 | Rod sensing element, monoblock design |
≥ 2,5 |
-20…+85 °С |
up to 204 |
5 |
Grain and its grinding products; other bulk media with dielectric permittivity ɛ > 2,5 |
Notes:
1. Impurities in the form of:
mechanical particles (textile fibers, sand, solid corrosion products, etc. from 0.5 mm and a content of up to 25 g/l);
food waste with dimensions up to 0.5 mm and a content of up to 1g/l;
fat waste containing up to 4g/l;
starch content up to 0.5 g/l;
soaps with a content of up to 4g/l;
vinegar with a 3% content of up to 0.05 g/l;
mineral oils containing up to 1g/l.
2. Within the durability of the materials of the sensor element.
3.Within the wettability of the sensitive .
4. The primary converters of the signaling devices are sealed when exposed to a controlled environment of an operating overpressure of no more than 20MPa for signaling devices with a flanged connection, and no more than 1MPa for signaling devices with a threaded connection.
Deviations from the nominal response level:
not more than ± 1 mm for versions 1,2 (see the table);
not more than ± 15 mm for version 3 (vertical mounting method);
not more than ± 30 mm for version 4 (vertical mounting method);
within the diameter of the CHE for versions 3,4 (horizontal mounting method).